Ricoh DDP User Manual page 98

Message
Stacker x Paper Full
Remove Paper
Stacker x Top Cover Open
Close Cover
Stacker x V Path Cover Open
Close Cover
Sub Tray Cover Open
Close Cover
Sub Tray Paper Full
Remove Paper
Switch Back Cover Open
Close Cover E045
Toner Collector Bottle Full
Replace Bottle E010
Toner Collector Not Set
Check Toner Bottle E01D
Toner Low
Add Toner
Toner Out
Supply Toner E011
Tray 1 Open
Close Tray E020
Tray 1, 2, or 3 Open
Tray 1, 2, or 3
Load xxx E090
Tray 1, 2, or 3
Load xxx
Tray 2 Open
Close Tray E021
Tray 3 Open
Close Tray E022
Trimming Trash Box Full
Empty Box E028
Trimming Trash Box Not Set
Check Box
Trimming Unit Not Set
Check Unit
Wait
Waiting for data
Warming up
5-14 Troubleshooting
Description
The stacker is full. x is the stacker
number.
The top cover of the indicated stacker
is open. x is the stacker number.
The V path cover of the indicated
stacker is open. x is the stacker
number.
Self-explanatory.
Self-explanatory.
Self-explanatory.
Self-explanatory.
The toner collector bottle is not seated
properly.
Print quality will diminish until toner is
replenished.
The toner supply is empty
Self-explanatory.
Self-explanatory.
The wrong paper size is loaded in the
tray.
The specified tray needs paper.
Self-explanatory.
Self-explanatory.
The trimming trash box of the
Publishing Finisher is full.
The trimming trash box of the
Publishing Finisher is not seated
properly.
The trimming unit of the Publishing
Finisher is not seated properly.
Status message.
Status message. May appear if: 1) a
large file is being processed, 2) the
network connection is slow, or 3) a print
job was not terminated correctly.
Status message. Displayed during the
power up cycle.
Corrective Action
Remove the paper.
Close the cover.
Close the cover.
Close the cover.
Remove the paper.
Close the switch back cover (on the
left side of the printer).
Replace the toner collector bottle.
Reseat the bottle.
Supply toner.
Supply toner.
Close the tray.
Close the tray.
Load the specified tray with the
requested paper size.
Load the specified tray with the
requested paper size.
Close the tray.
Close the tray.
Empty the box.
Reseat the box.
Reseat the trimming unit.
Wait for the printer to return to a Ready
state.
Wait for the printer to return to Ready
state.
Wait for the printer to reach a Ready
state.