Positioning the Printer Safely
To prevent the risk of electric shocks and personal injury, fire, and printer damage:
Switch off the printer before connecting the interface cable or optional accessory.
■
CAUTION
Do not place the printer near heaters or volatile, flammable, or
combustible materials.
Place the printer on a level and sturdy surface that can withstand the printer's
■
weight. If tilted, the printer may fall over and cause injuries.
Do not place the printer in a hot, humid, dusty, or poorly ventilated environment.
■
When moving the printer, be sure to unplug the power cord from the outlet. If the
■
printer is moved with the power cord connected, it can cause damage to the cord.
When moving the printer, do not tilt it more than 10 degrees. If tilted excessively,
■
the printer may fall over and cause injuries.
If you need to move the printer over a long distance, consult your Technical
■
Representative.
Environmental Limit
The printer is capable of operating normally within the following recommended
■
environmental limits:
Temperature range: 50°-89°F (10°-32°C).
❒
Humidity range: 20-80% RH (no condensation).
❒
:
NOTE
Sudden temperature fluctuations can affect print quality. Rapid heating of
a cold room can cause condensation inside the printer, directly interfering
with image transfer.
Do not expose the printer to direct sunlight, or the printer's performance may
■
decline.
337922-002
!
Safety Information
9