Chapter 8 Operation And Troubleshooting; Led Status Indicator - Ricoh AP1400/AP2000 Operating Instructions Manual

This chapter describes normal operation of the Network Interface Board in the printer, and
also provides information on how to troubleshoot any problems you might have with the
Network Interface Board.
8.1

LED Status Indicator

The Network Interface Board has two LED status indicators: amber and green. The amber
LED generally indicates job activity; it flashes when a print job is being communicated to the
Network Interface Board; it is off when no activity is occurring.
The green LED indicates the operating condition of the Network Interface Board when it is
powered on during normal operation. The following table provides the conditions that this
LED may indicate.
Green LED is
ON solid.
Green LED -
blinks 3 times
and stays on.
Green LED
blinks rapidly.
Green LED
blinks rapidly 4
times then
pauses.
Chapter 8-1
LED Patterns And the printer
First powered
on.
Awaiting print
jobs.
Finished with
self-tests.
Performing self-
tests.
Performing self-
tests.
Chapter 8
Operation and
Troubleshooting
Then the NIB...
is...
Is performing
self-tests.
Is functioning
properly
Prints out status
report.
Detects a bad
RAM chip.
Failed the
Ethernet
hardware self-
test. Check the
network.
Operating
Condition
Normal
Normal
Normal.
Error. Contact
service
representative.
Error. Check the
cable connection
and restart the
printer. If this
error occurs
often, contact
service
representative.