Functional Description
Specifications
Components and Controls
Roller Guide
(opening in Reel Cover)
Hose Stopper
Outlet to tool
Inlet from
Compressor
Initial Hose Reel Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Mounting Reel
1. Choose a mounting location that is free of electrical
wiring or other obstructions, and is sturdy enough
to support the weight of the Reel and hose as
well as the force used to extend and retract it.
2. Mark the center of the Mounting Bracket bolt
holes in the desired mounting location.
Page 4
Hose Length
Maximum Air Pressure
Air Inlet and Outlet
Reel
Hose
For technical questions, please call 1-888-866-5797.
20'
250 PSI
1/4" -18 NPT
Reel Cover
Figure A
3. Check for hidden wiring, then, drill holes to
accommodate the bolts (not included).
4. Mount the Reel and secure in place with the bolts.
Mounting Bracket
Item 95211