Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17b
Advertisement
Table of Contents
Related Manuals for Central Pneumatic 68293
Summary of Contents for Central Pneumatic 68293
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Safety Alert Symbol And Signal Words
Keep the work area clean and well lighted. unstable and is able to lead to loss of control. Cluttered benches and dark areas increase the risk of electric shock, fire, and/or injury to persons. Page 2 For technical questions, please call 1-888-866-5797. Item 68293... -
Page 3: Symbols And Specific Safety Instructions
2. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause cancer and birth defects Item 68293 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Vibration Precautions
1. Anyone using vibrating tools regularly or for an INSTRUCTIONS. extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or Page 4 For technical questions, please call 1-888-866-5797. Item 68293... -
Page 5: Air Supply
Adjust the pressure gradually, while checking the air output gauge to set the right pressure range. 8. Inspect the air connections for leaks. Repair any leaks found. Item 68293 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Page 6 For technical questions, please call 1-888-866-5797. Item 68293...
- Page 7 Item 68293 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Tool Set Up
Wipe off any excess grease on outside of Container Tube. d. Re-attach Container Tube to gun head and press the Plunger Release Valve. Pull down Plunger Handle and begin using. Page 8 For technical questions, please call 1-888-866-5797. Item 68293... -
Page 9: Cleaning, Maintenance, And Lubrication
2. Make sure Nozzle and tip of Grease Gun are clear of dirt, grease or any debris after each use. Item 68293 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Troubleshooting
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-888-866-5797. Item 68293... - Page 11 Tower Spring Shield 12-1 Tower Spring Retainer Ring O-ring Tower Spring Piston Seat O-ring Housing Air Inlet Nylon Nut Inlet Plug Lever Plunger Handle Piston Plunger Release Tab Connector 12-1 Item 68293 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.