Central Pneumatic 97014 Set Up And Operating Instructions Manual

Engine cleaning gun with siphon hose

Advertisement

Quick Links

engine cleaning gun
with 4' siphon hose
set up and operating instructions
note: 4' Flexible clear Vinyl siphon hose not shown.
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
read this material before using this product.
Failure to do so can result in serious injury.
saVe this Manual.
Copyright
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
distributed exclusively by harbor Freight tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
©
2007 by Harbor Freight Tools
97014
®
. All rights reserved. No portion of
®
.

Advertisement

Table of Contents
loading

Summary of Contents for Central Pneumatic 97014

  • Page 1 4’ siphon hose Model 97014 set up and operating instructions note: 4’ Flexible clear Vinyl siphon hose not shown. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
  • Page 2: Important Safety Information

    Notice Notice related to personal injury. caution, without the safety alert symbol, caution caution is used to address practices not related to personal injury. For technical questions, please call 1-800-444-3353. SKU 97014 Page 2...
  • Page 3: General Safety Rules

    Use of the Engine Cleaning Gun for operations different from those intended could result in a hazardous situation. For technical questions, please call 1-800-444-3353. SKU 97014 Page 3...
  • Page 4: Specific Safety Rules

    It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. For technical questions, please call 1-800-444-3353. SKU 97014 Page 4...
  • Page 5: Specifications

    There is no assembly required. operating instructions read the entire iMportant saFetY inForMation section at the beginning of this manual including all text under subheadings therein before set up or use of this product. For technical questions, please call 1-800-444-3353. SKU 97014 Page 5...
  • Page 6 Trigger (5) quickly and release. The Gun should start and stop completely. If it does not, do not use until it can be adjusted or repaired. see Figure 1. Place end of Siphon Hose (2) into a container of engine cleaning solution. For technical questions, please call 1-800-444-3353. SKU 97014 Page 6...
  • Page 7: Maintenance And Servicing

    Replace if Air regulator not set at proper PSI necessary. Siphon Control Knob in a closed Check, make sure Air Regulator is position set at 60 PSI Open the Siphon Valve For technical questions, please call 1-800-444-3353. SKU 97014 Page 7...
  • Page 8: Please Read The Following Carefully

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 97014 Page 8...
  • Page 9: Limited 90-Day Warranty

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission oaks Blvd. • Po Box 6009 • camarillo, cA 93011 • (800) 444-3353 For technical questions, please call 1-800-444-3353. SKU 97014 Page 9...

Table of Contents