Getting Started; Guide To Components - Ricoh Aficio DSc432 Settings Manual

Guide to Components

1.
Exposure glass cover (optional) or
Auto Document Feeder (ADF)
Lower the exposure glass cover over
originals placed on the exposure glass. If
you have the ADF, load a stack of origi-
nals here. They will be fed automatically,
one by one.
(The illustration shows the ADF.)
2.
Exposure glass
Place originals face down.
3.
Internal tray
Copied, printed paper or fax messages
are delivered here.
4.
Main power switch
If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on. If it
is off, turn it on.

1. Getting Started

5.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
6.
Control panel
See p.21 "Control Panel".
7.
Remove Paper Indicator
The indicator is lit when paper is output
to the internal tray 2 (1 bin tray). If the in-
ternal tray 2 has not been installed, the in-
dicator does not light.
8.
Internal tray 2 (1 bin tray) (optional)
9.
Front cover
Open to access the inside of the machine.
AFT044S
17