Troubleshooting
e Removing Jammed Staples
e
e
e
Note
❒ Staples might jam because of curled copy paper. In such a case, try turning
the copy paper over in the tray. If there is no improvement, change to a copy
paper with less curl.
❒ When the 500-Sheet Finisher is installed, after removing jammed staples, sta-
ples might not be ejected the first few times you try to use the stapler.
Reference
For the type of finisher, refer to "External Options" ⇒ p.19
500-Sheet Finisher
6
132
ZGJS795E
ZGJS796E
ZGJS810E
ZGJS811E
• 1: Open the side cover.
• 2: Remove the cartridge.
• 3: Open the face plate.
• 4: Remove jammed staples.