Triumph Tiger XCA Owner's Handbook Manual page 37

To change the selected riding mode:
• Either push the joystick left or
right, or repeatedly press the MODE
button until the required mode is in
the center of the display screen,
highlighted with an arrow above it.
• A brief press of the joystick center
will select the required riding mode,
and the icon in the upper left of the
display screen will change.
1 2
F
o7:29
PM
12.5
E
m
2
1. MODE button
2. Current riding mode
3. New riding mode
• Push the joystick left/right or press
the MODE button to scroll through
the riding mode options in the
following order:
– RIDER
– RAIN
– ROAD
– SPORT
– OFF-ROAD
– OFF-ROAD PRO.
12 14
1 2 3 4 5 6
10
8
6
mph
4
3
The selected mode is activated once the
following conditions for switching modes
have been met:
Motorcycle Stationary - Engine Off
• The ignition is switched ON
• The engine stop switch is in the
RUN position.
Motorcycle Stationary - Engine Running
• Neutral gear is selected or the
clutch is pulled in.
Motorcycle in Motion
Within 30 seconds of selecting a riding
mode the rider must carry out the
RPM
x1000
following simultaneously:
N
• Close the throttle
• Pull the clutch in
2 0
• Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
Note:
• It is not possible to switch into or
out of OFF-ROAD, OFF-ROAD PRO or
RIDER modes while the motorcycle
is in motion, if the ABS or TC
settings are set to OFF-ROAD or
OFF in either of those modes.
• In this case, the motorcycle must
be brought to a stop before the
riding mode change can take place.
If a riding
completed,
between the previous riding mode and
the newly selected riding mode until the
change is complete or it is canceled.
The riding mode selection is now
complete and normal riding can be
resumed.
Instruments
mode change
the icon will
is not
alternate
37