Moving Off; Shifting Gears - Triumph Tiger XCA Owner's Handbook Manual

Hide thumbs Also See for Tiger XCA:
Table of Contents

Advertisement

If the side stand is extended while the
engine is running, and the transmission
is not in neutral then the engine will
stop regardless of clutch position.

Moving Off

To move the motorcycle:
• Pull in the clutch lever and select
first gear.
• Open the throttle a little and let out
the clutch lever slowly.
• As the clutch starts to engage,
open the throttle a little more,
allowing enough engine speed to
avoid stalling.
How to Ride the Motorcycle

Shifting Gears

Take care to avoid opening the throttle
too far or too fast in any of the lower
gears as this can lead to the front
wheel lifting from the ground (pulling a
wheelie) and to the rear tire breaking
traction (wheel spin).
Always open the throttle cautiously,
particularly if you are unfamiliar with
the motorcycle, as a wheelie or loss of
traction will cause loss of motorcycle
control and an accident.
Do not shift to a lower gear at speeds
that will cause excessive engine rpm
(r/min). This can lock the rear wheel
causing
loss
accident. Engine damage may also be
caused.
Shifting down the gears should be
done so that low engine speeds will be
ensured.
6
5
4
3
2
N
1
1.
Gear shift pedal
Warning
Warning
of
control
and
1
an
121

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tiger xcxTiger xrTiger xrxTiger xrtTiger xrx-lrh

Table of Contents