Job Preset - Ricoh Aficio 3025 Function Manual

Job Preset

You can make settings for the next
copy job while copying is in progress.
If a long copy job is in progress and
you do not want to wait for it to fin-
ish, you can use this function to make
settings for the next copy job in ad-
vance. When the current copy job fin-
i s h e s , t h e n e x t
automatically.
A
Press [Next Job] when "
appears.
B
Make settings for the next copy
job.
C
Place the originals in the ADF,
and then press the {Start} key.
All originals are scanned.
D
Press [To "Printing"].
The initial copy display appears.
Following the current copy job, the
next job starts automatically.
Note
❒ You can switch the display to
the current copy job by pressing
[To "Printing"]. You can switch
the display to the preset job by
pressing [To "Reserving"].
j o b s t a r t s
"
Copying
Basic Procedure
2
21