Table of Contents
Advertisement
This section explains how to set originals that are to be scanned in the scanner.
Originals can be set either on the contact glass or in the Auto Document Feeder (ADF). The Auto
Document Feeder (ADF) is useful when you want to scan multiple originals consecutively.
Originals
Recommended Sizes and Weights of Originals
Where original is set
Contact glass
Auto Document Feeder (ADF) Maximum:A3
Originals that cannot be set in the Auto Document Feeder (ADF)
Setting an original that falls in one of the following categories in the Auto Document Feeder
(ADF) could result in a paper jam or in damage to the original. Such originals should be
placed on the contact glass.
An original that does not fall within the "Recommended Sizes and Weights of Origi-
nals"
An original that includes staples, paper clips, glue, or other adhesives
An original that has holes or is torn
An original that is warped, creased, or wrinkled
An original that is pasted together
An original that has some sort of surface treatment, including thermal paper, art board,
silver paper, carbon paper, or conductive paper.
An original that has index tabs, stick-on notes, or other protrusions
An original on paper that does not slide easily, such as tracing paper
An original on thin, fragile paper
An original that is not of a suitable thickness, such as a postcard
"Recommended Sizes and Weights of Originals"
An original that is bound, such as a book
3. Setting Originals
Original size
Up to A3
Up to 11" x 17"
Minimum:69 x 120mm
Maximum:11" x 17"
Minimum:2.75" x 4.75"
Original weight
---
2
41 ~ 128g/m
11 ~ 34lb
17
Advertisement
Table of Contents
