Table of Contents
Advertisement
Getting Started
Getting Started
Setting the security function
Registering a security code
(Only for DDX418BT)
1
Display the Home screen.
2
Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch as follows:
[System]
<Security Code> : [Set]
3
Enter a four-digit number (
2
confirm the entry (
).
• To delete the last entry, touch [Clear].
• To cancel the setting, touch [Cancel].
6
ENGLISH
4
Repeat step 3 to confirm your security
code.
Now, your security code is registered.
To clear the registered security code: touch [CLR]
for <Security Code> in step 2.
Then, enter the current security code to clear and
touch [Enter].
• When the unit has been reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then touch
[Enter].
Activating the security function
You can activate the security function to protect your
receiver system against theft.
1
Display the <Setup> setting screen.
1
On the Home screen, touch as follows:
), then
2
Activate the security function.
On the <Setup> setting screen, touch as follows:
[System]
The security function is activated.
The security indicator on the monitor panel flashes
when the vehicle ignition is off.
To deactivate the security function: Touch [OFF] in
step 2.
<SI>: [ON]
Clock settings
1
Display the Home screen.
2
Display the <Clock> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch as follows:
[System]
<Clock> : [Enter]
• You can also display the <Clock> screen by
touching the clock area on the Home screen.
3
Set the clock time.
Clock
Synchronize
Radio Data System
AM10
:
28
Reset
E.g. Clock settings screen for DDX395
<Synchronize>
• Radio Data System: Synchronizes the clock time
with FM RBDS.
• OFF: Sets the clock manually. Touch [
adjust the hour, then minute.
– Touching [Reset] will set the minute to "00".
J
K
]/[
] to
Hide quick links:
Advertisement
Table of Contents
