Wiring Connection - Kenwood DDX395 Instruction Manual

Installation and Connection Installation and Connection

Wiring connection

*1 *2 *3
Purple with white stripe
Light green
¥
]
White / White with black stripe
]
Gray / Gray with black stripe
]
Green / Green with black stripe
]
Purple / Purple with black stripe
Brown
Orange with white stripe
Light blue with yellow stripe
Blue with white stripe (12 V
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
56
ENGLISH
10 A fuse
"
*3
Connect the antenna cord to the antenna terminal
USB input terminal (1 m)
To the car's reverse lamp harness when using the optional rear view camera
REVERSE
PRK SW
[
To front speakers (left)
[
To front speakers (right)
[
To rear speakers (left)
[
To rear speakers (right)
Not used.
MUTE
To the car light control switch
ILLUMI
STEERING WHEEL
REMOTE INPUT
To the OE remote adapter (not supplied) which is compatible with your car
REMOTE CONT
350 mA)
To the power control terminal when using the optional power amplifier (Or)
ANT.CONT
P.CONT
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Extension wire ( ø )
*1 Only for DDX395/DDX375BT/DDX25BT.
*2 Only for DDX395/DDX375BT.
*3 Only for DDX418BT.
To the car's parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Ignition key switch
To the car chassis
Car fuse
Car battery