English Indications Are Used For The Purpose Of Explanation. You Can Select The Display Language From The [Function] Menu. ( 5) - Kenwood Pandora KMM-BT303 Instruction Manual

GETTING STARTED
DISPLAY
EASY MENU When entering [FUNCTION]...
ON: ZONE 1 illumination changes to white color. ;
OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 22)
• ZONE 2 illumination changes to white color when you enter [FUNCTION],
irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 21 for ZONE identification.
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/
FM2/FM3/AM/SW1/SW2). ; MIX: Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP *
ON: Activates the keypress tone. ; OFF: Deactivates.
TDF ALARM *
ON: Activates the alarm if you forget to detach the faceplate when ACC is set to OFF. ;
OFF: Deactivates.
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 7)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.
* Not applicable if 3-way crossover is selected.
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the
unit is turned off. ; OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music
information if applicable.
TURKCE
By default, [ENGLISH] is selected.
Change the crossover type
1
Press repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover
select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then
press the knob.
4 Turn the volume knob to select "YES" or "NO", then press
the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 19, 20).
Caution
Select a crossover type according to how the speakers are
connected. ( 28)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.
ENGLISH 5