Wiring Connection - Kenwood KMM-264 Instruction Manual

Wiring connection

When connecting to an external amplifier, connect its
ground wire to the car's chassis to avoid damaging the
unit.
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
B3 Gray ]
: Front speaker (right)
Gray/black [
B4
White ]
B5
: Front speaker (left)
White/black [
B6
B7 Green ]
: Rear speaker (left)
B8 Green/black [
Fuse (10 A)
Yellow (Battery wire)
Ignition wire
(Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
ISO connectors
Front output
Rear/subwoofer output
If no connections are made, do not let the wire come out
from the tab.
STEERING WHEEL
Light blue/yellow
REMOTE INPUT
(Steering remote
REMOTE CONT
control wire)
ANT CONT
Blue/White
(Power control
P. CONT
wire/ Antenna
control wire)
Brown
(Mute control wire)
MUTE
Part list for
installation
Rear/subwoofer output
(A) Faceplate
Antenna terminal
(B) Trim plate
To the steering wheel
remote control adapter
(C) Mounting sleeve
To the power control
terminal when using the
optional power amplifier
(D) Wiring harness
or to the antenna control
terminal in the vehicle
To the terminal that
is grounded when the
(E) Extraction key
telephone rings or during
conversation ( 11)
(To connect the Kenwood
navigation system,
refer your navigations
manual.)
13
ENGLISH