Supporting The Motorcycle - Yamaha TT-R TT250RN Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
1
3
1. Nut (×2)
4
2. Remove the license plate light
lens by removing the nuts.
5
6
7
8
9
1
1. Bulb (×2)
3. Remove the defective bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the lens by installing the
nuts.
6. Install the license plate light by
installing the nuts.
6-33

Supporting the motorcycle

Since this model is not equipped with
a centerstand, follow these precau-
tions when removing the front and
rear wheel or performing other main-
tenance requiring the motorcycle to
stand upright. Check that the motor-
cycle is in a stable and level position
before starting any maintenance. A
strong wooden box can be placed
under the engine for added stability.
To service the front wheel
1. Stabilize the rear of the motorcy-
cle by using a motorcycle stand
or, if an additional motorcycle
stand is not available, by placing
a jack under the frame in front of
the rear wheel.
2. Raise the front wheel off the
ground by using a motorcycle
stand.
EAU01579