Yamaha TT-R TT250RN Owner's Manual page 31

INSTRUMENT AND CONTROL FUNCTIONS
1
1
2
b
3
1. Rebound damping force adjusting dial
4
2. Adjust rebound damping force as
follows.
5
Turn the adjusting dial in direction a
to increase rebound damping force
6
and in direction b to decrease
rebound damping force.
7
16 clicks in direction b*
Minimum (soft)
10 clicks in direction b*
Standard
8
1 click in direction b*
Maximum (hard)
* With the adjusting dial fully turned in direction a
9
cC
Never attempt to turn the adjuster
beyond the maximum or minimum
setting.
a
1. Compression damping force adjusting knob
3. Adjust
force as follows.
Turn the adjusting knob in direction
a to increase compression damping
force and in direction b to decrease
compression damping force.
Minimum (soft)
Standard
Maximum (hard)
* With the adjusting knob fully turned in direction b
EC000016
cC
Never attempt to turn the adjuster
beyond the maximum or minimum
setting.
1
b
a
compression damping
5 clicks in direction a*
8 clicks in direction a*
15 clicks in direction a*
EC000016
3-12
w
This shock absorber
highly pressurized nitrogen gas.
For proper handling, read and
understand the following informa-
tion before handling the shock
absorber. The manufacturer can-
not be held responsible for proper-
ty damage or personal injury that
may result from improper han-
dling.
8 Do not tamper with or attempt
to open the gas cylinder.
8 Do not subject the shock
absorber to an open flame or
other high heat sources, other-
wise it may explode due to
excessive gas pressure.
8 Do not deform or damage the
gas cylinder in any way, as
this will result in poor damp-
ing performance.
8 Always have a Yamaha dealer
service the shock absorber.
EAU00315
contains