Yamaha TT-R TT250RN Owner's Manual page 33

INSTRUMENT AND CONTROL FUNCTIONS
With the engine turned off:
1. Move the sidestand down.
1
2. Make sure that the engine stop switch is set to "#".
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
2
5. Push the start switch.
Does the engine start?
3
With the engine still running:
4
6. Move the sidestand up.
7. Keep the clutch lever pulled.
5
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
6
7
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
8
12. Push the start switch.
Does the engine start?
9
The system is OK. The motorcycle can be ridden.
YES NO
YES NO
YES NO
NOTE:
This check is most reliable if performed with
a warmed-up engine.
The neutral switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
3-14