Regular Maintenance; Maintenance Schedule; Check Tire Pressures - Allis-Chalmers AC-130 Series Operator's Manual

Regular
Maintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your tractor and mower.
MAINTENANCE ITEMS
Check Safety Interlock System
Check Tractor Brakes
Check Mower Blade Stopping Time
Check Tractor/Mower for loose hardware
Check / Clean Cooling Fins (If Equipped)
Check / Adjust PTO Clutch
Lubricate Tractor & Mower **
Lubricate Rear Axle Shafts
Clean Battery & Cables
Check Tire Pressure
Clean Deck & Check/Replace Mower Blades**
Check Engine Oil Level
Check / Change Engine Air Filter *
Change Engine Oil *
Change Engine Oil & Filter *
Inspect Spark Plug(s) *
Check / Replace Fuel Filter *
* Refer to engine owner's manual. Change original
engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or
dusty operating conditions.

Check Tire Pressures

Service Interval: Every 25 Hours
Tire Pressure should be checked periodically, and main-
tained at the levels shown in the chart (see Figure 9).
Note that these pressures may differ slightly from the
"Max Inflation" stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut
quality, and extend tire life.
Before Every 5 Every
Each Hours 25
Use Hours
•
•
Size
20 x 10.0-8
15 x 6.0-6
Figure 9. Tire Pressures
18
Every Every
100 250
Hours Hours
•
•
•
•
•
•
•
•
• •
•
PSI bar
10 0,68
12-14 0,82-0,96
Spring
& Fall
•
•
•
Yearly
•
•