The Start Menu - AKA Berkut 5 Operating Instructions Manual

If device startup has passed successfully, the device will play a melody and will
enter into the search mode (a Fig. 9):
Otherwise, after a warning melody, there will be a warning as shown in a Fig. 10:
In this case switch off the device and repeat coil compensation in a different place
(Having previously determined the absence of any metal objects). If compensation still does
not occur, after insuring there is no presence of large metal objects, check to make sure the
coil connector is seated correctly and the proper coil is installed. If this has been verified
and compensation is still not established the device will need to be returned to the service
center.
Device power off is carried out by pressing the power switch to the down or off
position.
Once the switch has been turned off the device may take up to 10 seconds to
completely shut down as settings are stored into the internal memory.

THE START MENU

At device power on it is possible to enter certain key startup parameters without
waiting for the system to perform coil compensation. As displayed in fig 8 these are
12
S K M An
A
T
3
THE COIL IS NOT
COMPENSATED.
REPEAT COMPENSATION
TURBO -003
Fig. 9
Fig. 10