Samsung TB531VCT1X/XSA Service Manual page 76

Alignments and Adjustments (Mechanical)
4-6 Tape Transport System and Adjustment Locations
The tape transport system has been adjusted precisely in the factory. Alignment is not necessary except for
the following :
1. Noise observed on the screen.
2. Tape damage.
3. Parts replacement in the tape transport system.
Lower flange height of tape guide is used as the reference for the transport adjustment.
To maintain the height of the tape guide and prevent damage, do not apply excessive force onto the main
base.
GUIDE ROLLER S
FULL ERASE HEAD
#3 GUIDE SHAFT
TENSION POLE
#1 GUIDE POLE
CAM TENSION
POLE TENSION
#1 GUIDE POLE
4-64
CYLINDER ASS'Y
SUPPLY REEL DISK
Fig. 4-61 Location of Tape Transport Adjustment
FE HEAD
GUIDE ROLLER "S"
#3 GUIDE SHAFT
Fig. 4-62 Tape Travel Diagram
TILT SCREW
GUIDE ROLLER T
AZIMUTH SCREW
#8 GUIDE SHAFT
TAKE UP REEL DISK
CYLINDER ASS'Y
GUIDE ROLLER "T"
X POSITION ADJUST GEAR
HEIGHT SCREW
REVIEW GUIDE POLE
PINCH ROLLER
ADJUSTING ;
CHECKING ;
PINCH ROLLER
#8 GUIDE SHAFT REVIEW POLE
ACE HEAD
CAPSTAN SHAFT
MAIN BASE
Samsung Electronics