Samsung TB531VCT1X/XSA Service Manual page 33

4-4-2 Assembly of Slide Rack Housing and Master Gear
1. Confirm that the hole of Master Gear
2. Align the Slot #1 of Master Gear
Samsung Electronics
and the hole ÒAÓ of Main Base are aligned correctly. (Eject mode)
with the Tooth #1 of Rack Housing Slide
TIMING POINT
SLOT #1
DETAIL
( TOP VIEW )
( SIDE VIEW )
Fig. 4-21 Assembly of Slide Rack Housing and Gear Master
TOOTH #1
A
(SLIDE VIEW)
Alignments and Adjustments (Mechanical)
. (Refer to timing point)
1 GEAR MASTER
2 SLIDER RACK
HOUSING
ARM " R"
4-21