Printing On Postcard Size Paper - Ricoh PRIPORT VT2130 Operating Instructions Manual

8. Printing on Postcard Size Paper
AS postcards do not absorb ink well, offset images may appear on the rear side of
following prints. TO avoid th~, reduce the printing speed and place a sheet of paper on
top of each printed postcard.
-
Postcard size original
1.
—
Place the postcard sized paper on the
I I
2.
3.
4.
paper feed table.
Make sure that the paper feed side plates
contact the paper lightly.
Set the original guides
postcard size original.
to match the
Insert the origin~ face down into the
original table until it stops.
Make the prints. (See page 14 to 17.)
The original is larger than postcard and the image is postcard size.
f
1
I
Paper Feed
D Irectlo n
x
1. Place the postcard size paper on the
paper feed table.
Make sure that the paper feed side plates
contact the paper lightly.
2. Cut the leading edge of the original as
shown in the illustration. Leave 15
mm/O.6''(9/l6") margin when you cut.
3.
Insert the original face down into the
original table until it stops.
4.
Make the prints. (See page 14 to 17.)
23