Preparing The End Label (Label) - DURKOPP ADLER 550-867 Service Instructions Manual

Fig. 193: Setting multi barcodes
4. Specify under Mask count of multiple barcode how many multi
5. Specify under Multi barcode mask printed label which

23.13 Preparing the end label (Label)

You use this option to define the layout of the end label using standard
settings and without the help of the Label Creator. You specify which
barcode type will be printed, which information will be contained in the end
label barcode and where on the end label the barcode will be printed.
Information
You can use the button Define extended label printing to add additional
information to the end label.
You can use the software or the additional program Label Creator to
create the end label ( p. 230).
206
barcodes are supposed to be requested.
If you, for instance, wish to scan 5 multi barcodes, the digit to be read
in the barcode must be the number 5:
000010000000000000000000000000
information is supposed to be included in the end label barcode.
rd
If, for instance, the 3
to be transferred to the end label, define the 3
001100000000000000000000000000
th
and 4 digit of the multi barcode is supposed
Service Instructions 550-867 - 00.0 - 12/2017
Programming
rd th
and 4 digit as 1: