Storing The Economy Transmission Time; Voice Request (This Feature Requires A Handset) - Ricoh FAX5600L Operator's Manual

Ricoh printer / scanner / fax / copier operator's manual fax5600l
Hide thumbs Also See for FAX5600L:
Table of Contents

Advertisement

ROUTINE OPERATION

Storing the Economy Transmission Time

Before using Economy Transmission, you must use Function 74 to program a
time for Economy Transmissions to start. This should be the start of the off-peak
rate period for your area. After you have stored this, you will not need to change it
again until your telephone company changes the starting time of the off-peak rate
period.
1.
Function
6
0
2
2. Input the time that you always wish Economy Transmissions to start.
To change from AM to PM and vice versa, press
3. Press
Yes
Function

Voice Request (This feature requires a handset)

Using this feature, you can have a telephone conversation with the other party, on
the same call, after your fax message has been sent out. This is useful if you wish
to discuss the contents of the fax message with the other party.
You can save overall telephone line costs because you don't have to redial the
other party to have the conversation.
Note: This feature cannot be used with Memory Transmission.
The following procedure tells you how to set up a Voice Request. However, refer
to "Talk After Sending a Fax" on page 80 for details on how to answer the phone
when it rings.
2
2
2
7
4
ECONOMY TX
when the display is correct.
SENDING A FAX MESSAGE
TIME=
11
:00AM
YES
or
.
#
*
TO END
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax5600

Table of Contents