Yamaha QBIX LTV125 Owner's Manual page 44

Instrument and control functions
Tripmeter mode
1
1. Tripmeter
The tripmeter shows the total distance
traveled since it was last reset.
6
TIP
 The odometer will lock at 999999
and cannot be reset.
 The tripmeter will reset and con-
tinue counting after 9999.9 is
reached. To reset the tripmeter,
while it is being displayed, press
the "RESET/SELECT" button for
at least one second.
Average fuel economy mode
1
1. Average fuel consumption display
This display shows the average fuel
economy or average fuel consumption
since it was last reset.
The average fuel economy display can
be set to either "km/L" or "L/100 km".
 "km/L": The average distance that
can be traveled on 1.0 L of fuel is
shown.
 "L/100 km": The average amount
of fuel necessary to travel 100 km
is shown.
To switch between the average fuel
economy display settings, push the
"RESET/SELECT" button for one sec-
ond.
To reset the average fuel economy,
push the "RESET/SELECT" button for
one second.
6-9
TIP
After resetting the average fuel econo-
my, "_ _._" will be shown until the vehi-
cle has traveled 0.1 km (0.06 mi).
The battery voltage indicator
This indicator shows the current
charge state of the battery.
 Over 12.8 V → full charge
 Under 12.7 V → charging is re-
quired.
TIP
If the battery voltage is less than 9.0 V,
"_ _._" will be displayed.
Self-diagnosis mode
1
1. Error code display