Stop And Start System Operation - Yamaha QBIX LTV125 Owner's Manual

Stop and Start System opera-
tion
Activating the Stop and Start Sys-
tem
1. Turn the key to "ON".
ON
2. Set the Stop and Start System
switch to " ".
A
EAU76671 3. When the vehicle confirms that the
following conditions are met, the
Stop and Start System activates
and the Stop and Start System in-
EAU77610
dicator light comes on.
 The Stop and Start System
switch is set to " ".
 After the engine was warmed
up, the engine was left idling
for a certain period of time.
 The vehicle has traveled at a
speed of 10 km/h or higher.
4. To turn off the Stop and Start Sys-
tem, set the Stop and Start Sys-
tem switch to " ".
Stop and Start System
A
TIP
To preserve battery power, the Stop
and Start System may not activate for
a while and the " " indicator light on
the speedometer goes off.
Stop the engine
After the " " indicator light on the
multi-function meter comes on, the en-
gine stops automatically after a few
seconds when the engine is left idling
when the vehicle is stopped and the
throttle grip is in the fully closed posi-
tion.
At this time, the " " indicator light on
A
the multi-function meter starts flashing
to indicate that the engine is currently
stopped by the Stop and Start System.
5-2
A
EAU76691
A
A
5