Main Switch/Steering Lock (Ltv125/Ltv125-R) - Yamaha QBIX LTV125 Owner's Manual

Instrument and control functions
Main switch/steering lock
(LTV125/LTV125-R)
ZAUU1022
6
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering, to open the
seat, and to open the fuel tank cap.
The various main switch positions are
described below.
TIP
The main switch is equipped with a
keyhole shutter. (See page 6-4 for key-
hole shutter opening and closing pro-
cedures.)
EAUU1761
ON
All electrical circuits are supplied with
power; the meter lighting, taillight, and
auxiliary lights come on, and the en-
gine can be started. The key cannot be
removed.
TIP
The headlight comes on automatically
when the engine is started and stays
on until the key is turned to "OFF" or
the sidestand is moved down.
OFF
All electrical systems are off. The key
can be removed.
LOCK
The steering is locked, and all electrical
systems are off. The key can be re-
moved.
EAUT1972 To lock the steering
1. Turn the handlebars all the way to
2. Push the key in from the "OFF"
EAUU1131
3. Remove the key.
TIP
EAUU1043
If the steering will not lock, try turning
the handlebars back to the right slight-
ly.
6-3
the left.
position, and then turn it to
"LOCK" while still pushing it.