Troubleshooting
Problem
The main power indicator
continues blinking and
does not turn off when
pressed.
Original images are print-
ed on the reverse side of
the paper.
Misfeeds occur frequently.
4
An error message remains,
even if misfed paper is re-
moved.
You forgot your key opera-
tor code.
84
Causes
This occurs in the follow-
ing case:
• The machine is commu-
nicating with external
equipment.
You may have loaded the
paper incorrectly.
The tray's side fences may
not be locked.
The tray's end fence may
not be set properly.
You may have loaded pa-
per of a size not shown on
the paper size selector.
When a misfeed message
appears, it remains until
you open and close the cov-
er, as required.
—
Solutions
Check if the machine is communi-
cating with a computer.
Load paper correctly. Load paper
into Tray 1-4 with the print side up,
and bypass tray with the print side
down.
Check the side fences are locked.
p.88 "Changing the Paper Size".
Check the end fence is set properly.
See p.88 "Changing the Paper Size".
When using paper of a size that can-
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.30 "Tray Paper Size:Tray
1–4" and p.107 "Copy Paper".
Clear misfed paper, and then open
and close the front cover. See p.85
"x Clearing Misfeeds".
Contact your service representative.