Copying Onto Ohp Transparencies - Ricoh Aficio 1050 System Settings

A
Press the [Auto Reduce/Enlarge] key.
B
Select the paper tray.

Copying onto OHP Transparencies

To make copies onto OHP transparencies, you need to specify the paper type.
For details, see "Tray Paper Settings" in the System Settings manual.
A
Open designated OHP tray (Tray2-6).
B
Lightly insert the OHP transparencies face up.
Note
If you would like slip sheets (blank or copied) between your OHP trans-
parencies, see
You cannot set the OHP transparencies into the Tandem Tray or optional
A3/11" 17 " Tray Kit.
To avoid paper misfeeds, fan the OHP transparencies before setting it in
the tray.
C
Select the paper tray in which OHP transparencies are loaded.
D
Set your originals then press the {Start} key.
Important
When copying onto OHP transparencies, remove copied sheets one by
one.
P.164 "Slip Sheets".
Basic Functions
2
41