C
Press the [Multi
D
Check the orientation.
Note
To change the copy orientation to "Top to Bottom", press the [Orientation]
key, then press the [Top to Bottom] key. If you do not, go to step F.
The default setting is "Top to Top". You can change this setting with the
copy User Tools. See
To select "Top to Bottom"
A Press the [Orientation] key.
B Press the [Top to Bottom] key then press the [OK] key.
E
Select the paper.
F
Set your originals then press the {Start} key.
Note
When placing one original on the exposure glass or in the document feeder
in Batch (SADF) mode, press the {#} key at the last original.
2 Sided] key.
P.314 "General Features".
Copying Book Originals
125
2