Exiting Connect Copy Mode - Ricoh Aficio 1050 System Settings

Exiting Connect Copy Mode

A
Press the [Connect] key on the master unit.
The [Connect] key will be deselected.
Note
Settings which were selected on the master unit while in Connect Copy
mode will not be cleared.
Press the {Clear Modes} key to cancel the master unit settings and return to
the initial state.
The sub-unit will return to the state which is before entering Connect Copy
mode.
Reference
If you cannot exit Connect Copy mode, see
Connect Copy"
Using Connect Copy
P.273 "If You Cannot Exit
4
255