Ricoh 3260 Scanner Reference page 88

Configuring/Registering Scan Settings
When using the exposure glass
A Press the { { { { Start} } } } key.
When scanning is finished, the
time remaining to place addi-
tional originals is displayed.
Note
❒ The selected destination ap-
pears while scanning the
originals.
B When there are additional orig-
inals, place them within the
specified time, and then press
the { { { { Start} } } } key.
7
Repeat this step until all origi-
nals are scanned.
Note
❒ If you change settings while
the machine is waiting for
addition al originals, the
countdown stops. Press the
{ { { { Start} } } } key to resume the
countdown and scanning.
When using the ADF
A Select [SADF] in [Original Feed
Type].
Note
❒ If [SADF] does not appear, se-
lect [SADF] in [Switch to Batch]
of [Scanner Features]. See.
p.101 "Switch to Batch".
80
B Press the { { { { Start} } } } key.
When scanning is finished, the
time remaining to place addi-
tional originals is displayed.
Note
❒ The selected destination ap-
pears while scanning the
originals.
C When there are additional orig-
inals, place them within the
specified time.
The machine starts scanning au-
tomatically.
Note
❒ If you change settings while
the machine is waiting for
additional originals, the
countdown stops. Press the
{ { { { Start} } } } key to resume the
countdown and scanning.
❒ You can also use the expo-
sure glass instead of the
ADF. In this case, you must
press the { { { { Start} } } } key to start
scanning.
D D D D
When all originals are scanned
and the countdown is finished,
the machine starts storing or
sending automatically.
Note
❒ You can also press the { { { { #} } } } key
to start storing or sending.