Memory Recall - Oricom DTX4000 Operating Instructions Manual

Operations
1. Press hold MENU/GTS button to Group Tone Scan.
All group tone scan stored into Group memory channel and CTCSS
01 (67Hz) is set for Group Tone Scan.
The Group tone code can be change by menu mode.
2. To stop Group memory Scan, Press MENU/GTS button or PTT press.

Memory Recall

This feature allows the user to active the stored
channels in the MR button.
To access channel in the MR button, simply press
the "MR" button, and the "A" will appear at the right
side on the LCD. Press memory button you want to
access From A to C Group.
Continuous Press MR button will be change to A->B->C->A blinking ->B
blinking -> C brining ->A.
If SC/RM button press and start of all memory Group scanning at
during the blinking A to C.
The DTX4000 has no information stored in the memory channels.
Memory Write
Select the channel you want to store.
For this example we write CH09 to B group and group channel 8.
1. Press hold MR/MW button. The memory write.
The appear A and group channel 1 blinking.
2. Press MR/MW button change for the B group.
3. Press channel selector change of CH mode.
4. Channel selector rotation until 8 is shown in group channel display.
5. Press hold MR/MW button to save & exit from memory write.
16
MR
MW
press hold