Miele ESW 6114 Operating And Installation Instructions page 37

Cleaning the drawer front and
interior
The On/Off sensor must be kept
clean. Soiling and liquid on the sensor
could cause it to fail to react or to
switch the appliance on or off
unintentionally.
 Remove all soiling using a solution of
hot water and washing-up liquid
applied with a sponge or use a clean,
damp microfibre cloth.
 Wipe with clean water afterwards.
 After cleaning, wipe the surfaces dry
using a soft cloth.
Cleaning and care
Cleaning the anti-slip mat
Do not wash the anti-slip mat in a
dishwasher or washing machine.
Never place the anti-slip mat in the
oven to dry.
 Remove the anti-slip mat for
cleaning.
 Clean the anti-slip mat by hand only,
using warm water and a little
washing-up liquid, and then dry with
a cloth.
 Do not put the anti-slip mat back into
the drawer until it is completely dry.
37