Oven functions
The following functions are available:
– For warming cups and glasses
– For warming plates and dishes
– For keeping food warm
– For low temperature cooking
The last function selected is
automatically activated the next time
the drawer is switched on, and this is
shown in the display.
The appliance has a fan which
distributes the warm air evenly
throughout the drawer. The fan runs
– constantly when the "Warm
cups/glasses" and "Warm
plates/dishes" functions are in use.
– at intervals with the "Keep
food warm" and "Low
temperature cooking" functions.
The drawer can be used to keep food
warm at the same time as warming
plates and dishes. Use the "Keep
food warm" function for this.
Caution!
The plates and dishes will take
longer to warm up with this function
than in the "Warm plates/dishes"
function, but can get very hot.
Duration
Do not leave the drawer unattended
for too long in continuous operation
mode. Keeping food warm for a long
time can result in it drying out or
even self-igniting.
Your drawer is fitted with a safety
switch-off mechanism which
switches it off after a maximum of
12 hours' continuous operation.
The drawer is set for continuous
operation mode (Exception: Low
temperature cooking).
A limited duration can be selected by
touching the sensor. One touch for 1
hour (1h), two touches for 2 hours (2h)
etc., up to a maximum of 4 hours.
Continuous operation is restored by
touching the sensor a fifth time.
Temperature settings
Each function has its own temperature
range. The factory default
recommended temperatures are printed
in bold. The temperature can be altered
in 5° steps by touching the sensor.
The last temperature selected is
automatically activated the next time
the drawer is switched on, and this is
shown in the display (Exception: Low
temperature cooking).
Operation
19