Connecting The Hoses; Connecting The Hoses To The Washing Machine; Connecting The Hoses To The Dispensing Unit - Miele AWD 10 Operating Instructions Manual

Connecting the hoses

Connecting the hoses to the washing
machine
^ Take the 6 screws out of the bag.
^ Unscrew the cover cap on the rear of
the washing machine.
^ Keep both screws as you will need
these to secure the hoses.
Installation and connection
^ Note the diameter at the end of the
hoses, to ensure you insert the
correct hose to the washing machine.
Tip to make fitting easier: Moisten the
hose seals with water or suds solution
beforehand.
^ Press each hose using some force
into its appropriate opening and
secure with the screws supplied.
Connecting the hoses to the
dispensing unit
^ Note the diameter at the end of the
hoses, to ensure you insert the
correct hose to the dispensing unit.
9