Page 3
PREFACE FLUID HEAD The E-IMAGE GENTING Series is an upgraded generation Thank you for purchasing E-IMAGE professional heads and E-Image fluid heads with international tripods. This manual is an important tool for personnel who influences, innovative designs, more advanced operate and maintain this equipment. Inside, you will functions.
CONTENTS CONTENTS Fluid Head Specifications.…………………..1 Tripod Specifications………………………………………….. 15-16 Parts(GH03)………………………………....2 Parts(AT7402A) ……………………………………………...17 Set up & Use....………………………..3-5 Use AT7402A ……………………………………………...18-19 1. Installing the Pan Handle.……………...... . 3 1. Releasing and Locking the Legs..……………….......18 2. Removing the Quick Release Plate…....... 3 2.
3.Adjusting Tilt Position SET UP & USE (GH03) Loosen the tilt locking knob G to change tilt position. Tighten the knob to lock the tilt position. 1.Install Pan Handle Place the pan handle E in the desired position on the pan handle mounting rosette F, then secure it by tightening pan handle locking thumb screw D.
MOUNTING THE CAMERA EXTRA FUNCTIONS OF GH03,GH06 PLATE 6. To mount a camera or camcorder, remove the quick release plate 8.Extra Functions of GH03, GH06 plate from the tripod head. Attach the plate to the camera using the included ¼”-20 or 3/6”-16 screw. Take care not to over-tighten the screw. The GH03 and GH06 fluid heads have a special clip that allows the GP1 quick release plate to be pressed down into place.
PARTS(GH06~GH25) SET UP & USE(GH06-GH25) 1. Installing Pan Handle Place the pan handle A in the desired position on the rosette M and tighten the locking thumb screw C, making sure the locking washer T is in place between the handle and rosette.
Page 9
MOUTING THE CAMCORDER VIA ADAPTER MOUNTING THE CAMERA 4.Mounting a Large Camera with the PS-C VCT-14 Adapter 5.Mounting the Camera to the Quick Release Plate 4.1 Attach the quick release plate to the bottom of the VCT-14 mounting 5.1 Attach the quick release plate to the bottom of the camera using the adapter (part no.
ADJUSTING COUNTERBALANCE & DRAG ADJUSTING PAN DRAG 6.Adjusting Counterbalance Settings Loosen the tilt locking knob H and hold the head steady with the pan 8. Adjusting Pan Drag handle. Turn the counterbalance dial I to a setting that allows the camera Loosen the pan locking knob K.
CHANGE BATTERY OF ILLUMINATED LEVELING BUBBLE (GH08 GH08L GH10 GH10L) CHANGE BATTERY OF ILLUMINATED LEVELING BUBBLE (GH15 GH25) 9.Changing the Battery on the Bubble Level LED Light 10. Changing Batteries (GH15,GH25) (GH08, GH08L ,GH10,GH10L) 9.1 Test the light by pressing button N to turn it on. If the light turns on, 10.1 Check the battery using the LED activation button N the batteries are still good.
Page 12
Aluminum The E-IMAGE GENTING series is a new generation Single stage 2.9kg 40kg GA751 75mm 780-1380mm 820mm of E-IMAGE tripods. These tripod legs are all made of Aluminum Single stage 2.6kg 40kg GC751 75mm 780-1380mm 820mm high-grade aluminum or carbon fiber materials. The...
PARTS(AT7402B) USE AT7402B 1.Lock and Unlock Leg Stages To Loosen: Turn lock C counter-clockwise Bowl Base To Lock: Turn lock clockwise Leg Tube Locking Knob Retractable Easy Hook Mid-Level spreader ෭ࣅ Spiked Tripod Foot Anti-Slip Rubber Pad (Part no. F3) lock Rubber Foot Securing Tab loose...
Page 14
PARTS(GA101/GC101) USE AT7402B 4. Folding Tripod Bowl B ase a: Loosen the locking knobs for all extended leg stages and reduce them Leg Tube to their minimum length, then re-lock all of the knobs Patented Leg Lock (Mono-Lock) for Leg Stages Retractable E asy Hook Ground Spreader Locking Knob Ground Spreader Pull Ring...
PARTS(GA102/GC102) PARTS(GA/GC751 GA/GC752) Bowl Base Bowl Base Leg Tube Leg Tube Patented Leg Lock (Mono-Lock) for Leg Stages Patented Leg Lock (Mono-Lock) for Leg Stages Retractable Easy Hook Retractable Easy Hook Ground Spreader Locking Knob Mid-Level Spreader Locking Knob Ground Spreader Pull Ring Mid-Level Spreader Pull Ring Ground Spreader Mid-Level Spreader...
USE(GA/GC751 GA/GC752 GA/GC101 GA/GC102) USE(GA/GC751 GA/GC752 GA/GC101 GA/GC102) 4. To remove the mid-level spreader, remove the retaining pin K located where the spreader attaches to the leg. 1.Loosening and Locking Tripod Legs To Loosen: Turn locking knob C counter-clockwise To Tighten: Turn locking knob C clockwise lock 5.
Maintenance Always engage safety devices like locks and easy hooks when applicable. Do not use E-IMAGE tripods and fluid heads at temperatures less than -30°C or more than 60°C. Daily maintenance: Clean with a mild detergent and soft cloth, a semi-stiff brush, or a Storage and Transport: vacuum.