Iiyama ProLite LE7540UHS User Manual page 25

[ About the daisy chain ]
 Monitor control connection
RS-232C
MONITOR1 MONITOR2
PC
[RS-232C]
[RS-232C IN] [RS-232C OUT] [RS-232C IN]
[ To setup the network ]
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press HOME button on the remote control, then select Setup.
4. Select "Connect to network", then press OK button.
5. Follow the on-screen instructions to install the network.
6. Wait for this display to fi nd the network connection.
7. If you are prompted, agree to the "End User Licence Agreement".
NOTE Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
INTERNET
ROUTER
[RJ-45]
[RJ-45]
PC
BEFORE YOU OPERATE THE DISPLAY 21