Furuno DRS4DL Install Manual page 11

How to fasten the bracket to the mast
1. Drill eight holes of 6.5 mm diameter in the mast and fix the bracket with eight stain-
less steel rivets (local supply) of 6.4 mm diameter.
2. Tighten the bolts on the bracket.
3. Fasten the radar sensor to the bracket.
Connect the power cable to the power source, observing the guidelines for laying the
power cable shown on this page.
ASSEMBLED RADOME MOUNT
M8×20
M8×20
Fixing plate
M8×20
Bracket (2)
How to assemble the radome mount
Mounting plate
Bracket (1)
Support plate (2)
Support plate (1)
M4×12
6
Rivet
M10×25
How to fasten the sensor to the radome mount
1. INSTALLATION