Before Operation Checklist - Aztec EDGEWINDER Owner's Manual

BEFORE OPERATION CHECKLIST

For your safety, to ensure compliance with environmental regulations, and to maximize the service
life of your equipment, it is very important to take a few minutes before you operate this machine to
check its condition. Be sure to take care of any problem you find, or have your service dealer correct
it before you operate this machine.
problem before operation, may cause a malfunction in which you can be seriously hurt or killed.
Always perform a pre-operation inspection before each use, and correct any problem.
Before beginning your pre-operation checklist, the machine and engine must be on a level surface,
with the engine switch in the OFF position, and the propane tank valve is in the CLOSED position.
Always check the following items before you start the engine:
A. READ AND UNDERSTAND ALL SAFETY MESSAGES
Carefully read and understand all SAFETY INSTRUCTIONS on pgs 3-8.
B. CHECK THE GENERAL CONDITION OF THE MACHINE
1.) Look around and underneath the machine and engine for signs of oil leaks.
2.) Remove any excessive dirt or debris, especially around the muffler and recoil starter.
3.) Look for signs of damage.
4.) Check that all shields and covers are in place, and all nuts, bolts and screws are tightened.
C. CHECK THE ENGINE
1.) Check the engine oil level and filters. Running the engine with a low oil level can cause
engine damage. Your first oil change should be after the first 5 hours of use.
2.) If equipped, the "Oil Alert" buzzer will warn you when the engine oil needs to be added to
the crankcase. If the buzzer sounds, stop the engine and add oil.
3.) Check the air filter element (see pg 20). A dirty air filter element will restrict air flow to the
carburetor, reducing engine performance.
D. CHECK THE MAINTENANCE SCHEDULE
Review the maintenance log that should always be kept with the machine. Perform any
maintenance necessary before proceeding. All machines are equipped with a multi-function
maintenance meter. The functions include the following: hour meter, service alert and
tachometer. (See ENGINE MAINTENANCE METER instructions on pg 22).
05-2017
Improperly maintaining this machine and its engine, or failure to correct a
EDGEWINDER OWNER'S MANUAL PAGE 9