Oil Change - Aztec EDGEWINDER Owner's Manual

OIL CHANGE

First, review to the HONDA ENGINE MAINTENANCE SCHEDULE on pgs 22-23. It is important to
follow these guidelines to protect your engine.
Drain the used oil when the engine is warm. Warm oil drains quickly and completely. To change the
oil, follow these steps:
1.) Stop the engine and make sure the machine is
on a level surface.
2.) Place a suitable container below the engine to
catch the used oil, then remove the oil filler
cap/dipstick, oil drain plug and washer.
3.) Allow the used oil to drain completely, then
reinstall the oil drain plug and new washer, and
tighten the oil drain plug securely.
4.) With the engine in a level position, fill to the
upper limit mark on the dipstick with the
recommended oil, see pg 17. Do not overfill.
5.) Screw in the oil filler cap/dipstick securely.
Always dispose of used motor oil in a manner that is responsible and compatible
with the environment. One option is to take used oil to in a sealed container to your local recycling
center or service station for reclamation. DO NOT throw used oil in the trash, pour on the ground, or
down the drain.
05-2017
EDGEWINDER OWNER'S MANUAL PAGE 18