Allnet ALL0484WMP User Manual

ALL0484WMP
24 Port 10/100 + 2 Combo
Gigabit FX/SFP
Nway PoE Switch
User's Manual

FCC Warning

This device has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 2 and 15 of FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment.
equipment generates and radiates radio
frequency energy and, if not installed and
used in accordance with the user's manual, it
may cause interference in which case users
will be required to correct interference at their
own expenses.

CE Warning

This is a Class B product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.

Introduction

This switch provides 24 10/100Mbps NWAY
RJ-45 ports and can support 2 Combo Gigabit
Copper/SFP to uplink.. It was designed for
easy installation and high performance in an
environment where traffic is on the network
and the number of users increases
continuously.
It consists of 24 PSE/PoE ports. That can
solve the limitation of the power outlet
location and offer the system designer a
flexible solution to locate the network device
everywhere.
The rack-mount size was specifically
designed for medium to large workgroups.
The switch can be installed where space is
limited; moreover it provides smooth network
migration and easy upgrade to network
capacity. The 19" size can be rack-mount on
19" cabinet.

Key Features

Provides 24 10/100Mbps Gigabit switching
ports and 2 Combo Gigabit Copper/SFP
24 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port
19" rack-mount size
This Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Store-and-forward operation support
Embedded 2.75 Mb packet buffer
Provides 4K MAC address entry
Supports broadcast storm filtering
All ports provide Auto-Negotiation and Auto
-MDI/ MDI-X functions
Supports flow control: back pressure for
Half-duplex and IEEE 802.3x for Full-duplex
mode
Smart plug & play

Package Contents

Before you start to install this Switch, please
verify your package contain the following
items:
• One Rack-mount Switch
• Rack-mount Kit for Rack Installation
• One AC Power Cord
• One User's Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.

Front Panel (LEDs)

LED Indicators of
24 Port + 2 Combo
Gigabit Copper/SFP PoE Switch
No. Of
LED Status Description
LED
Power On Power on Power
On Link 1000Mbps
1000M 2 (25~26)
off Link 10/100Mbps
On Link 26 (1~26)
Link/ ACT
Flashing Data activating 26 (1~26)
Port is linked to
On 24 (1~24)
Power Device
PoE
No Power Device
Off 24 (1~24)
is connected