HP E1563A User Manual page 31

SLAVe Mode
Master-Slave Diagrams
Use TRIGger:MODE SLAVe0
MASTer0 module. MASTer0 and SLAVe0 modules share TTL trigger lines
TTLT0 and TTLT1. TTLT0 carries the sample signal and TTLT1 carries
the trigger signal. The following table shows all pairs of TTL trigger lines
for each master-slave mode.
Table 2-2. Trigger Sources for Master-Slave Modes.
MASTer SLAVe
MODE MODE
MASTer0 SLAVe0
MASTer2 SLAVe2
MASTer4 SLAVe4
MASTer6 SLAVe6
Figures 2-4 illustrates a module configured as a master module. Figure 2-5
illustrates a module configured as a slave module.
to configure a module as a slave to a
MASTer-SLAVe
Trigger Sources
TRIG:SOUR1
TTLT1
(except TTLT0 & TTLT1)
TTLT3
(except TTLT2 & TTLT3)
TTLT5
(except TTLT4 & TTLT5)
TTLT7
(except TTLT6 & TTLT7)
Digitizer Application Information
TRIG:SOUR2
Any source
Any source
Any source
Any source
31