RODE Microphones NT5 Instruction Manual

Hide thumbs Also See for NT5:

Advertisement

NT 5
Instruction
Manual
( EMC, LVD )

Advertisement

Table of Contents
loading

Summary of Contents for RODE Microphones NT5

  • Page 1 NT 5 Instruction Manual ( EMC, LVD )
  • Page 3 Please take the time to read the following information which will help you to achieve the best possible performance from your NT5. Peter Freedman Sydney, Australia...
  • Page 4: Specifications

    Specifications: Capsule: Externally polarised 1/2” (13 mm) pressure gradient condenser. Active Electronics: JFET Impedance converter with bipolar output buffer. Pick-up Patter: Cardioid (see graph) Frequency Response: 20 Hz ~ 20 kHz (see graph) Sensitivity: -38 dB re 1 v/Pa +/- 2 dB equivalent to 12 mV/Pa where 1 Pa = 94 dB SPL.
  • Page 5: Operation And Applications

    Ensure that the power supply you use is a professional unit that is operating correctly. Damage due to connection of the NT5 to a faulty power supply is not covered by guarantee. 2. The NT5 comes complete with a microphone stand-mount (RM5).
  • Page 6 Move the NT5, adjust the gain, and ensure that the sound you are monitoring is the sound you prefer. If it is not, make adjustments. The NT5’s frequency response and SPL handling...
  • Page 7: Warranty Service

    Fix the microphone securely to a dedicated microphone stand using the supplied (RM5) Stand Mount. 3. After use, the NT5 should be removed from its stand, wiped with a dry soft cloth and placed in its pouch. Be sure to place the pack of moisture absorbent crystals (silica gel) at the head of the microphone.
  • Page 8 877 328 7456 toll free 310 328 7456 In Australia, contact: support@rodemic.com or call: (02) 9648 5855 Anywhere except Australia, the United States and Puerto Rico, contact: support@rodemic.com Australia: 61 2 9648 5855 NT5 Single - v 1.0a 01/05/05 Subject to change witout notice...

Table of Contents