Warranty Service - RODE Microphones NT5 Instruction Manual

Some tips that may be helpful:
1. Condenser microphones do not like moisture!
The NT5, like all studio microphones, should be
kept dry at all times.
2. This microphone is a precision transducer
and should be cared for as such. Dropping, or
knocking the NT5 could damage it so please take
care. Fix the microphone securely to a dedicated
microphone stand using the supplied (RM5)
Stand Mount.
3. After use, the NT5 should be removed from its
stand, wiped with a dry soft cloth and placed in
its pouch. Be sure to place the pack of moisture
absorbent crystals (silica gel) at the head of
the microphone. The crystals will absorb any
moisture present. Eventually this pack will need
to be dried. When the crystals have turned
pink, the pack should be placed in an oven set
to between 100-150 degrees C. They will be
activated when they have turned blue.
Note: There are no user-serviceable parts inside this
microphone and so there will never be a reason for
you to dismantle it. To protect your warranty, any
service that requires dismantling must be performed
by a qualified

Warranty Service:

All products are warrantied for one
year from date of purchase. The warranty card or
on-line registration (www.rodemic.com) should be
used to register your microphone.
The warranty covers parts and labour that may
be required to repair the microphone during the
warranty period. The warranty excludes defects
caused by normal wear, modification, shipping
damage, or failure to use the microphone as
per the instruction guide.
If you experience any problems, or have any
questions regarding your
contact the Dealer who sold it to you.
service agent.
microphone, first,