RODE Microphones NT5 Instruction Manual
Compact 1/2” cardioid condenser microphone
Hide thumbs
Also See for NT5:
- Instruction manual (8 pages) ,
- Instruction manual (8 pages) ,
- Instruction manual (8 pages)
Advertisement
Quick Links
NT5
M3
Compact 1/2" Cardioid Condenser Microphone
Multi Powered 3/4" Condenser Microphone
*After online registration
Features
• Externally biased condenser
• Gold sputtered 1/2" capsule
• Heavy-duty satin-nickel plated body
• Dual power operation
• Surface mount circuitry
• Low noise
Specifications
Acoustic Principle
Pressure gradient
Frequency Range
20 Hz-20 kHz
Output Impedence
100Ω
Output Connection
3 pin XLR, balanced output
between Pin 2 (+), Pin 3 (-)
and Pin 1 (ground)
Net Weight
101g
Frequency Response
• Full frequency response
• Available as Certified Match Pair
• Designed and manufactured in Australia
• Full 10 year warranty*
Directional Pattern
Sensitivity
Dimensions
Shipping Weight
• Single - RM5 stand mount, ZP1 zip pouch
• Matched Pair - 2 x RM5 stand mount, RC5 case
Australia
107 Carnarvon st, Silverwater NSW 2128 Australia
Ph: +61 2 9648 5855
Fx: +61 2 9648 2455
Cardioid
-38 dB re 1 Volt/Pascal (12 mV @
94 dB SPL) +/- 2 dB @ 1kHz
Length - 118mm (4.6456")
Diameter - 20mm (0.7874")
Single - 350g
Matched Pair - 1.54kg
Polar Pattern
Included Accessories
and WS5 windshield
and 2 x WS5 windshield
www.rodemic.com
USA
PO Box 4189 Santa Barbara CA 93140 USA
Ph: +1 805 566 7777
Fx: +1 805 566 0071
Advertisement
Related Manuals for RODE Microphones NT5
Summary of Contents for RODE Microphones NT5
- Page 1 Compact 1/2” Cardioid Condenser Microphone Multi Powered 3/4” Condenser Microphone Features • Externally biased condenser • Full frequency response • Gold sputtered 1/2” capsule • Available as Certified Match Pair • Heavy-duty satin-nickel plated body • Designed and manufactured in Australia • Dual power operation • Full 10 year warranty* • Surface mount circuitry • Low noise Specifications Acoustic Principle Pressure gradient Directional Pattern Cardioid Frequency Range 20 Hz-20 kHz Sensitivity -38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) +/- 2 dB @ 1kHz Output Impedence 100Ω Dimensions Length - 118mm (4.6456”) Diameter - 20mm (0.7874”)
- Page 3 Instruction Manual www.rodemic.com ( EMC, LVD )
- Page 4 Whether you’ve purchased this mic on its own, or as a part of a matched pair set, I’m confi dent that you will fi nd the NT5 is a masterpiece of small-diaphragm cardioid-condenser microphone design. Please take the time to visit www.rodemic.com and register your microphone for a full ten year warranty.
-
Page 5: Specifications
Specifi cations Acoustic Pressure gradient Principle: Directional Cardioid Pattern: (see graph) Frequency 20Hz ~ 20,000Hz Range: (see graph) Output 100Ω Impedence: Sensitivity: -38dB re 1V/Pa @ 1kHz (12mV/Pa @ 94dB SPL) ±2dB @ 1kHz Equivalent Noise: <16dBA SPL (per IEC651) Maximum +13.9dBu Output:... - Page 6 Specifi cations Frequency Response Polar Response – – – Accessories Single stand mount windshield zip pouch Matched Pair 2 x stand mounts 2 x windshields hard case - 4 -...
- Page 7 Ensure that the power supply you use is a professional unit that is operating correctly. Damage due to connection of the NT5 to a faulty power supply is not covered by the warranty. • The NT5 comes complete with a microphone stand-mount (RM5).
- Page 8 (gain) set to OFF. • When fi rst switching the mixer on and phantom power has been applied to the NT5, or when the battery power has just been switched on, you should allow several seconds for the microphone to stabilize.
- Page 9 Move the NT5, adjust the gain, and ensure that the sound you are monitoring is the sound you prefer. If it is not, make adjustments.
-
Page 10: Warranty
Warranty microphones are warranted for one year from date of purchase. You can extend that to a full ten years if you register online at www.rodemic.com. The warranty covers parts and labour that may be required to repair the microphone during the warranty period.