Advertisement
1. Outline
The M3T-F160-100NSE is a converter board for connecting
the 160-core flexible cable FLX160 to a foot pattern for 100-
pin 0.4-mm-pitch TQFP (100PFB-A).
2. Package Components
(1) M3T-F160-100NSE converter board ....................... 1
(2) YQPACK100SE
(made by Tokyo Eletech Corporation) ......
(3) NQPACK100SE
(made by Tokyo Eletech Corporation) ......
(4) YQ-GUIDE's ............................................................ 4
(5) M3T-F160-100NSE User's Manual (this manual)
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal iterations of connector
4. Usage
(See Figure 2)
The M3T-F160-100NSE can be used for debugging and
onboard evaluation in common by mounting the
NQPACK100SE on the target system.
(1) For debugging
Mount the NQPACK100SE on the foot pattern of the
target system and attach the YQPACK100SE on it. And
connect the probe of the emulation pod to the upper
connectors of the M3T-F160-100NSE. Then connect the
YQPACK100SE and the M3T-F160-100NSE.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK100SE (separately available)
in that order on the NQPACK100SE on the target system.
Before using the M3T-F160-100NSE, be sure to read "7.
Precautions" on page 4.
(See Figure 1)
1
1
100PFB-A (100-pin 0.4-mm-pitch TQFP)
50 times guaranteed
( 2 / 4 )
M3T-F160-100NSE
YQ-GUIDE's (x4)
Figure 1 Package components
(1) For debugging
M3T-F160-100NSE
YQ-GUIDE's (x4)
YQPACK100SE
NQPACK100SE
100-pin 0.4-mm-pitch
(100PFB-A) foot pattern
: Position of No. 1 pin
Be sure to align the pins.
Figure 2 Usage
YQPACK100SE
NQPACK100SE
FLX160-PRB
or
M3xxxxTx-EPB
(2) For onboard evaluation
HQPACK100SE
(separately available)
MCU with on-chip flash
memory or one-time PROM
Advertisement
