4. If more than one Catalyst is found, you may need to temporarily disconnect one
or more of them to determine which the correct one is. Alternatively, you can
compare the MAC address printed on the Ethernet Module to the displayed
MAC Address.
5. Double-Click on the line containing the IP address of the Catalyst that you
want to configure. The configuration window will appear.
Saved: 2015-08-03
Filename:
Catalyst EtherNet Option Setup R5 V01.docx
RACO Manufacturing and Engineering
Copyright © 1998-2015 RACO. All rights reserved.
Page 9 (37)